User's Manual

Section 4 – Troubleshooting

D-Link DSL-2740E User Manual

IP QoS Configuration

Choose ADVANCED > Network Tool >QoS Configuration. The page shown in

the right figure appears. The QoS Configuration contains 3 parts: IP QoS

Configuration, QoS Rule list.

IP QoS Configuration

Choose ADVANCED > QoS Configuration > Configure QoS Global Options.

The page shown in the right figure appears. You can tick in the checkbox and

then click Submit to enable queuing operation.

Click Add Rule.

The following table describes the parameters of this page.

Field

Description

MAC

Specify Source MAC and Destination MAC.

Ip/mask

Specify Source IP/Mask and Dest IP/Mask

Port

Specify TCP port.

Protocol Type

Choose a protocol type matching with the QoS

rule.

Phy Port

Based on the Classify Type, choose a WAN/LAN

interface.

IPP/DS field

Select TOS or DSCP QoS

Ranges

Select or enter corresponding QoS value ranges

according to the IPP/DS field.

click Apply Changes to apply the settings.