User's Manual

Section 3 – Configuration

D-Link DSL-2642B User Manual

Enter the static routing information for an entry to the routing table.

Click the Save/Apply button when you are finished.

DNS

To access the DNS windows, click the DNS button in the Advanced Setup directory. The NAT button appears when configuring WAN interface in

PPPoA, PPPoE, MER or IPoA.

DNS Server

If you have not been given specific DNS server IP addresses or if the

Router is not pre-configured with DNS server information, tick the Enable

Automatic Assigned DNS checkbox. Auto discovery DNS instructs the

Router to automatically obtain the DNS IP address from the ISP through

DHCP. If your WAN connection uses a Static IP address, auto discovery

for DNS cannot be used.

If you have DNS IP addresses provided by your ISP, deselect the Enable

Automatic Assigned DNS checkbox and enter these IP addresses in the

available entry fields for the Primary DNS Server and the Secondary DNS

Server. Click the Save button when you are finished.