User manual
19D-Link DIR-508L User Manual
Section 3 - Conguration
To later reconnect to the Internet, you may click the Internet icon
and then click Connect in the pop-up dialog to enable DHCP.
Once you are connected, you can:
• Click on the Internet icon to view the IPv4 network details
below the diagram.
• View the IPv6 network details by clicking the IPv6 link at
the right side of the screen.
Note: This information will be saved as an Internet Prole for future
use. (For more information, refer to “Internet Proles” on page 29.)
Click on DHCP Release when you wish to disconnect from the
Internet.