Operation Manual
36D-Link ShareCenter DNS-320L User Manual
Section 3 - Installation
Under RAID Conguration, Select RAID Type, choose RAID 0. Read the RAID 0
conguration requirements.
Click Next to continue.
With RAID 0, the two drives are ‘striped’ into one volume, making it appear that
you have one drive. Data is saved evenly across the two drives.
Map Drive to Network indicates that the NAS has separated the drive into
2 volumes; if the two drives are dierent sizes, the excess drive space will be
formatted as a separate JBOD volume. To have only one volume, you should use
two hard drives of the same size.
Use the drop-down menus to select a drive letter to map each of the volumes to.
For further information, please refer to Mapping a Drive on page 48.
Click Next to continue.
RAID 0