Operation Manual
14D-Link ShareCenter DNS-320L User Manual
Section 2 - Getting Started
Zero Conguration Setup
If you have a mydlink-enabled cloud router (DIR-6xxL or DIR-8xxL), you can
take advantage of Zero Conguration setup. Zero Conguration automatically
congures your NAS’s settings for you, and adds it to your mydlink account. This
type of setup allows you to set up your DNS-320L by simply plugging it in and
connecting it to your mydlink-enabled router.
Connect your NAS to your mydlink-enabled cloud router and Zero Conguration
will automatically congure your DNS-320L and automatically add it to your
mydlink account. After the short time it takes to do this you can remotely access
your NAS from the www.mydlink.com website to manage and monitor your
DNS-320L.
Connect the Ethernet Cable
Use the included Ethernet cable and plug it into the DNS-320L. Plug the other
end into an available port on your router. If you wish to use your NAS wirelessly,
you will be able to remove the cable from the router after Zero Conguration
Setup is complete.