Operation Manual

180D-Link ShareCenter DNS-320L User Manual
Section 4 - Conguration
System Settings
System Settings provides features to control your DNS-320L. Users can restart the NAS, restore the system to it’s original state, set
idle times, shutdown the system, congure settings, and congure system temperature settings.
Click to reboot the DNS-320L.
Click to restore the device back to the factory default settings.
All previous settings that have been congured will be erased.
Click to turn o the DNS-320L.
Click on the Save button to save the current conguration
settings to a le on your computer. If at a later time you need
to reload this conguration after a system reset, browse to the
le and click Load.
Enter the amount of time after which the user administrator
will be automatically logged out if there is no activity. After an
automatic logout due to inactivity, the administrator will need
to log in again using their username and password.
Here you can congure the system temperature threshold value
to protect the device from overheating. This value can be set in
Fahrenheit or Celsius. The device will automatically shut down
when the internal sensor detects the temperature set here.
Restart:
Default:
Shutdown:
Conguration
Settings:
Idle Time:
System
Temperature
Threshold: