Operation Manual

157D-Link ShareCenter DNS-320L User Manual
Section 4 - Conguration
The Application Management section allows you to congure many services for your DNS-320L. The server and service settings
include: FTP server, Add-ons, AFP, NFS, and Multimedia Services. Lets begin by looking at conguration options for the FTP server.
Application Management
FTP server
Set the maximum amount of users that can connect to the FTP
server.
Set the amount of time a user can remain idle before being
disconnected.
Set the FTP port. The default port is 21. If you are behind a
router, you will need to forward the FTP port from the router
to the device. Additional ltering and rewall settings may
need to be modied on your router to allow FTP Access to the
device from the Internet. Once the port has been forwarded
on the router, users from the Internet will access the FTP server
through the WAN IP address of the router.
In situations where the device is behind a rewall and unable
to accept incoming TCP connections, passive mode must be
used.
Most standard FTP clients like Windows FTP, only support
Western European code page when transferring les. Support
has been added for non standard FTP clients that are capable
of supporting these character sets.
Max User:
Idle Time:
Port:
Passive Mode:
Client
Language
: