User`s manual

DP-101P+ Print Server User’s Manual
8 Introduction
Printer Port
The printer port, is configurable by commands in the PS Admin
program, or by commands issued to the DP-101P+ via Telnet. See
the PS Admin User’s Guide for configuration procedures.
The print server also supports web configuration permitting users
to configure settings through the web browser. DP-101P+ default
IP address as follows:
♦ Default IP address – 192.168.0.1
♦ Subnet Mask – 255.255.255.0
Note:-
The PC’s IP address must correspond with the print server’s IP
address in the same segment for the two devices to communicate.