User's Manual

29
[UnLink] – Contrary to the Link button, the UnLink button is used to off link
between the printer and your computer without physically disconnecting the two
devices.
[Lock] – Since the operation mode of the MFP can be set as Single User Mode (i.e.
only single specific computer can do printing) or Shared Mode (the default setting).
Clicking the Lock button, you may enable the Single User Mode.
[UnLock] – Clicking this button to enable the MFP as Shared Mode (i.e. End up the
Single User Mode of the MFP).
About: You may click this button to bring up a pop-up window as below to
verify the basic information about the PS-Link. Click OK button to close this window.
Close: To exit PS-Link, click this button.