Owners manual

36D-Link DCS-2630L User Manual
Section 4: Conguration
The IP Filter is a feature used to allow or deny certain IP addresses when accessing the camera.
Check this box to enable the IP Filter function.
Select whether to set the lter to Allow or to Deny connection
from the IP addresses listed.
The current list of IPv4 addresses that are being ltered. Select a
line and then click Delete to remove that entry.
The current list of IPv6 addresses that are being ltered. Select a
line and then click Delete to remove that entry.
From the drop-down menu, select whether to add a single IP,
an entire subnet, or a range of IP addresses. Enter an IP address,
subnet, or IP range, then click Add to create a new lter.
You can allow a single IP address to always have access to this
camera, regardless of the IP lter rules being used, by enabling
this option and entering the IP address.
IP Filter
Access List
Filtering:
Filter Type:
IPv4 Filter List:
IPv6 Filter List:
Add New Filter:
Administrator IP
Address: