Owners manual

25D-Link DCS-2630L User Manual
Section 4: Conguration
Network
Use this section to congure the network connections for your camera. All relevant information must be entered accurately. After making any changes,
click Save Settings.
Select this option if you have a DHCP server (i.e., router) running
on your network and would like your camera to obtain an IP
address automatically.
Select this option to manually enter the IP settings on your camera.
Enter an IP address for your camera.
Enter the subnet mask for your network. The default value is
255.255.255.0.
Enter the default gateway address. This is usually the LAN IP
address of your router.
Enter the IP address for the primary DNS (domain name server)
that translates names to IP addresses. This is usually the LAN IP
address of your router.
The secondary DNS acts as a backup to the primary DNS.
Select to enable this setting if your network uses PPPoE (Point
to Point Protocol over Ethernet). Select this option only if your
camera is directly connected to your broadband modem.
Enter the user name and password for your PPPoE account. Re-
enter your password to verify. You may obtain this information
from your ISP.
Displays the status as active or inactive.
Automatic IP
Address:
Static IP Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
PPPoE:
User Name &
Password:
PPPoE Status:
IPv4