Owners manual
19D-Link DCS-2630L User Manual
Section 4: Conguration
Step 3
If you have a Dynamic DNS account, you may have an IP address that frequently
changes. Check the box to Enable DDNS, allowing your camera to update your
IP address automatically. Enter host information as described below:
Step 4
Enter a unique name for your camera and click Next to continue.
Select your DDNS server from the drop down menu and
click <<.
Enter the Host Name of the DDNS server.
Enter your User Name or the e-mail address used to connect
to the DDN server.
Enter the Password used to connect to the DDNS server.
You can specify how often the camera noties the DDNS
server of its current global IP address by entering a whole
number representing hours.
Click Next to continue.
Server
Address:
Host Name:
User Name:
Password:
Timeout:
If you are required to connect using PPPoE (Point to Point Protocol over Ethernet),
check the box to Enable and enter the Username and Password for your PPPoE
connection. Only select this option if your camera is directly connected to your
broadband modem. If it is on a network with a router or gateway, do not select
this option.
Click Next to continue.