Owners manual

18D-Link DCS-2630L User Manual
Section 4: Conguration
Internet Connection Setup Wizard
Step 2
Select Automatic IP Address if you want your DHCP server (usually enabled on
your router) to assign the camera its IP settings.
If you want to manually assign the IP settings, select Static IP Address and enter
the following details from your Internet Service Provider (ISP):
Enter an IP Address for your camera.
Enter the Subnet Mask of your network.
Enter the Default Gateway address. This is usually the IP
address (LAN) of your router.
Enter the primary DNS server’s IP address. This is usually also
the IP address (LAN) of your router.
Enter the secondary DNS server’s IP address. This is optional.
IPv4 Address:
Subnet Mask:
Default
Gateway:
Primary DNS:
Secondary
DNS:
Step 1
The Internet Connection Setup Wizard will guide you through a step-by-step process
to congure your DCS-2630L and connect it the Internet.
Click Next to continue.
Note: Use this wizard if you are connecting the camera directly to a public IP address. If you are connecting the camera to a router, select Automatic IP
Address (DHCP) or select Static IP Address to manually assign the camera its IP settings.