Owners manual

15D-Link DCS-2630L User Manual
Section 4: Conguration
Conguration
Using the Conguration Interface
When you see the login window, enter the User name admin and
the password you created while using the Setup Wizard. If you
did not create a password, the default password is blank. Click
OK to proceed.
After installing and setting up your camera with the mydlink Lite app, you are ready to use your camera. The camera’s built-in Web conguration
utility is designed to allow you to easily access and congure your DCS-2630L.
To log in, open a web browser on your PC to go to http://www.mydlink.com and log in to your account. Select your camera, click on the Settings
tab, then click on the Advanced Settings button. Use the User name admin and the password you created while setting up the camera. If you did
not create a password, the default password is blank. After entering your password, click OK.
You can also enter the camera's IP address in your web browser. You can get the camera's IP address by logging into your router and looking at the
DHCP table or client list.