User Manual

34D-Link DPG-1200 User Manual
Section 3 - Configuration
Does not connect to
a network:
Connect to your
network using wired
Ethernet:
Connect to your
network using
wireless:
Enable PC-on-TV
Encryption:
Change Encryption
Key:
This setting means there is no connection from the
PC-on-TV device (either wireless or Ethernet cable)
to your network and the Internet.
This setting means you have an Ethernet cable
connected from your PC-on-TV device to your
router/network.
This setting means you will use the wireless access
point (that you select from the list) to access the
Internet.
This setting only applies to the first two options
(Does not connect to a network and Connect to
your network using wired ethernet) This setting
allows you to encrypt the wireless link from your
computer to the PC-on-TV device.
Allows you to enter a new Encryption Key.
Network Connection
The Network Connection interface allows the user to determine how to connect to the PC-on-TV device. There are two
types of connection, a wired connection (CAT5 Ethernet Cable) or a wireless connection (802.11g). If the User selects
a wireless connection, they can set security options to encrypt the data sent between the computer and the PC-on-TV
device.