User Manual

26D-Link DPG-1200 User Manual
Section 3 - Configuration
Using the Wireless PC-on-TV Application
Connection Status:
Advanced Settings
Button:
Signal:
Display Modes:
Close:
When a PC-on-TV device is connected the Name (SSID) of that device appears in the Connection Status window.
The Advanced Settings button expands the PC-on-TV application, allowing you to configure the advanced settings.
Indicates the strength of the wireless signal that is connected to the PC-on-TV device. Four orange bars indicate a good
signal, while one orange bar indicates a weak signal.
Use the Display modes to change the display on the connected television or home theater projector. To change display
modes click one of the following:
Select this option when you want to optimize PC-on-TV for video playback (half-line mode). The display will
automatically switch to optimized (half-line) mode when neither a keyboard or mouse movement is detected for 3
seconds. The default is set to Video mode.
Select this option when you want to view slide shows, graphic/text applications, or normal web pages. This mode
allows you to view PC-on-TV in high resolution.
Causes a blank screen to appear. Select this option when you want to “hide” the screen.
Clicking this button stops the display and disconnects your computer from the PC-on-TV device.
Connection Status
Advanced Settings
This section will describe the main features of the PC-on-TV application.
Close
Video:
Photo:
Hide Screen: