User's Manual

To add new phonebook
Under standby mode,
1. press Right softkey to select “ 10 Phonebook “.
2. press OK button and screen displays the first stored phone number if user has saved phone
book number before.
3. Press DOWN button to go to the next phone book number. If the next phone book is empty,
the screen display “EMPTY REC # “.
5. press OK button, the screen shows “ ADD NUMBER?”
6. press OK button again, the screen is ready to input phone number
7. dial phone number, press OK button
8. the screen shows “ ADD NAME”
9. press OK button.
10. the screen shows phone number on first line and is blinking the cursor on second line
which is ready to input name. Press OK button to save phone number, or go to the next step.
11. input name for keypad. Use DEL/MUTE button to move forward and “ * “ button for
space while dialing the name.
12. Press OK button to save phone number and name into Phone Book.
Note:
1. There is total 20 records of numbers are allowed to be saved on Phonebook on each
handset, and each handset can have his/her individual phonebook on handset.
2. The CID numbers also can be allowed to save into Phonebook. Please refer to SAVE CID
INTO PHONEBOOK.
Answering Machine System – Operating via Handset
To operate Answering Machine via handset, basically it’s similar to access remote control as
the description on the section of “ Operating remote control function through Tone
Telephone ”.
Setting Day/Time Stamp on handset
Once the phone is connected and set up the Day/Time, the system will synchronize the
Answering Machine Day/Time Stamp. Handset Day/Time is also to synchronize with base
Day/Time.
Initiating Answering Machine via handset
All the Answering Machine operation buttons are in base phone. If user to operate Answering