User's Manual

DOWN button. There are 8 levels available for choice. Move to the left side to turn off key
beep volume (key beep level 1 is mute).
3. press OK again to confirm. A long-beep sound emit out to confirm the setting.
06 Setting Contrast
To set contract:
Under standby mode, press Right softkey.
1. Use UP or DOWN button to locate “ 07 SET CONTRAST “ ,press OK button.
2. the screen shows LCDCTL: 01 – 08,
4. to adjust the brightness of display contract by pressing UP or DOWN (scale level 01 – 08,
the bigger number is darker).
5. press OK to save it and return to standby mode.
6. press OK again to confirm. A long-beep sound emit out to confirm the setting.
07 Alarm Set (Wake-Up Alarm)
To set alarm:
1. Under standby mode, press Right softkey.
2. use UP or DOWN button to locate “ ALARM SET “.
3. The screen will show “ 00-00A “ on seond line, and “ Enter Time “ on third line.
00A
Enter Time:
Note: how to edit “ 00-00A “ is by the following steps:
1) The first 2-digit means hour which require to dial two numbers from keypad. The hour number requires
from 01 up to 12.
2) The second 2-digit means minute which require to dial two numbers from 01 up to 59.
3) The last letter indicates AM or PM. To change AM or PM by pressing UP or DOWN button to rotate it.
4. Press OK button to save the time setting.
5. The screen will show “ Alarm OFF “, to set into “ Alarm ON “ by pressing UP or DOWN
button to rotate it.
6. Press OK button to save it.
7. press OK again to confirm.
A long-beep sound emit out to confirm the setting.
8. When the phone is alarming on time, press any button to terminate the alarm.
08 Help Display
To set up help display:
Under Standby mode, press Right Softkey,
1. use UP or DOWN to select 08 HELP DISPLAY, press OK button
2. use UP or DOWN button to select 01 DISPLAY ON or 02 DISPLAY OFF, press OK to