User's Manual

“ ,
4. Handset select DIAL by pressing Left softkey, the screen shows “ TALK PBOOK “.
5. Handset select TALK by pressing Left softkey, The system get another C/O to connect with
the third party. During in talking with line 2, the screen shows “ CONF RETRV “.
6. Handset select CONF by pressing Left softkey to activate the 3-way conference among line
1, line 2, and handset.
Handset Broadcasting (to all handsets)
1. When conversation in the line (under the talking mode) on handset, screen shows “ CONF
HOLD “,
2. Select HOLD by pressing MENU
right (soft key) on handset, screen shows “ NO:
RETRV “,
3. press “ # “ button, the screen shows: “ NO: HS RETRV “, and then press Left softkey
OK to broadcast all handsets. All handsets will ring at this time,
4. Ringing handset to answer the broadcast is by pressing any button or OK button.
5. Any one of handset to answer the broadcast, the rest of handsets will stop ringing.
6. Press the CONF button to have conference call
Caller ID System
This phone system automatically displays incoming callers name and telephone numbers
together with time and date of the call. It records up to 100 groups of call data. Base and
handset, if you purchase handset, share the same caller ID record list. No matter how many
HANDSETS link to the same BASE unit. Each handset can review Caller ID saved in Base
memory. Each handset also can select & pick up the caller ID records he want and save into his
individual handset phonebook.
The caller ID records are still in system memory after the handset has saved the record into his
phonebook.
The new indicator(the call led light) is flashing when receive new caller ID, and it’s also
blinking on top of LCD icon in base and handset.
To view caller ID on handset:
Under the standby mode,
1. press DOWN button once, the screen shows “ NEW: xx, TOTAL: xx “,