User's Manual

repeat/skip/speed/delete message/memos)
54. Memory full announce (under the full memory status, user can access messages via remote control)
55. Save/edit/erase messages on ICM
56. Mailbox code setting on system for each of 5 mailboxes
57. assign mailbox number to individual handset
58. Remote operation of TAD and mailbox via handset
(through handset remote access code)
59. Setting of voice announcement (ANNOC)
60. Remote operation of TAD and mailbox via outside telephone.
61. Setting Answer ON/OFF
( to initiate or to turn off Answering Machine)
62. To speed playing message – to run faster on message playing
63. Total Recording time: 14 min
64. 2 min recording time length for each message
Phone System Technique specification:
The system are:
1. 2.4G spread spectrum frequency hopping technology
2. FCC part 16, part 68 specification compliance
3. UL specification compliance
4. DTMF dialing meet RS-470 & CEPT standard
5. To use 9V 600mA AC power adaptor on phone base
6. To use 9V 300mA AC power adaptor on handset
7. To use handset battery 3.6V 800mA
8. Handset talking mode 11.4 Hours
9. Handset stand-by mode 133 Hours
10. Handset & Base LCD display 5 x 7 dot matrix segment
11. Handset & Base LCD display with backlit
12. Time/Date display
13. New Call display
14. Answering machine total recording time (OGM + ICM +MEMO): 14 min
15. OGM /MEMO recording time: 30 sec max
16. ICM recording time: 2 min max
Phone System Introduction
The system include:
1) Phone base operation,
2) handset operation,