User's Manual

Handset Operation
Handset Registration
To register new handset to base:
1. Under the Stand by mode, handset press Right softkey ,
2. Scroll UP or DOWN button to find “ 02 REG.HANDSET”, or just dial 02 from keypad to
go directly to item 2: “ 02 REG.HANDSET”“. Press OK button,
3. the screen shows “ HS NO: “, require to input wanted handset number by 2-digits, for
instances, 00 - 99, dial 2-digit number, press OK button to confirm the handset number.
4. the handset screen shows ‘WAIT CONF ‘ (Waiting registration Confirmation). At this
moment, Base press and hold down PAGE button for a few seconds (long key) until base
LCD shows “ALLOW REQ”.
5. After 2 – 3 seconds, the handset will come to display the registered number and emit out
three tones indicating the handset registration is successful.
A registered handset screen normally shows:
L1 L2
HS: 22 MENU
When handset registration is completed, the LCD screen shows (in standby mode): “ HS-01
MENU “, Base LCD screen shows the current time.
Making a Call
With the phone system you can make a regular call or pre-dial a telephone number.
Place a call via handset unit:
1. Press LINE 1 or LINE 2 button to get a dial tone. The Line 1 (or Line 2) indicator on top of
LCD is displayed
2. Dial the wanted number,
3. You will hear the dial tone.
4. to end conversation, press EXIT button.