User's Manual

3. After playing all of your messages, the system saves messages automatically. After playing
all of your messages, the system announces “ end of message ”.
To stop message:
1. Press STOP button once while playing a message, the system to pause the playing message.
2. Press PLAY button to continue playing the message where you stopped.
3. To press STOP button again (twice), the message is stopped. The system emit out “end of
message”.
To speed playing message/memo:
1. While the message are playing, press SPEED button and you hear the message voices are
playing faster (about 30% faster)
2. To resume the normal speed of playing message, press SPEED button again.
To skip messages/memo:
1. While playing message, press SKIP button once, the answering machine will skip the current
message and moves to the next message/memo and you hear “ message 2, sent at Sep 26, 11:
15AM”, then continue to play the message content.
To delete all of old messages:
1. Under standby mode, press and hold down the DELETE button until you hear the
announcement “Message deleted. You have no messages”.
2. When executing the message deletion, the system only to delete the old messages which you
already accessed. The new messages which you haven’t listened are still in the machine,
only after you listened and press DELETE button to clean message.
To delete the selected messages/memo:
1. While the unwanted message is playing, press DELETE button.
2. The system announces “Message deleted “, then you hear “ message 5, sent at Sep 28, 08:
37 AM “, then continue to play the message content.
When the memory is full:
1. When there is no memory available for additional messages, the system will announce
“ memory full”, but will not save messages. Then, the system will hang up phone.
2. Unless you enter into remote access code within 20 seconds of activating the remote control
function to maintain your connection with Answering system. If you delay to input the
access code within 20 seconds, the system hang up.