User's Manual

Local Area) and OUT OF AREA (1 group of Out of Area). Home Area and Local Area Code
need to be programmed for caller ID dialing back. The Home area code is the same area code
as the line connected to this base unit.
The system allow user to input and save Home Area Code , or 7 groups of Local Area Codes,
or Out of Area Code.
The Local area codes are provided for areas with 10-digits dialing where multiple area codes
are used to serve the calling area.
To input area code:
Under Standby mode
1. press MENU button,
2. use UP or DOWN to select 07 AREA CODE, press OK button
3. use UP or DOWN button to select: 01 HOME AREA, 02 LOCAL 1, 03 LOCAL 2 , 04
LOCAL 3, 05 LOCAL 4, 06 LOCAL 5, 07 LOCAL 6, 08 LOCAL 7, 09 OUT OF AREA, 10
AREA ON/OFF, press OK .
4. the cursor on screen will be on the second line which is ready for user to dial 3 digits
5. After dialing 3 digits, press OK to save this area code.
6. Repeat the same step to input/edit next local area code.
To edit out of area code:
The system will judge if this Caller ID ready for dialing out meet the above 8 groups area
codes ( 1 group of Home area code and 7 groups of Local area codes). If not, the system will
automatically add “ 1 “ on the prefix of the 10-digits dialing number. The defaulted OUT OF
AREA code (Long Distance Code: L-D-C) for U.S. is “ 1 “. The system automatically add “ 1”
to the outbound telephone number if a 10-digits dialing number does not match any of the 7
groups of Local Area Codes.
To close the editing of area code:
1. To disable the area code setting, selection 10 AREA ON/OFF
2. Use UP or DOWN to choose ON or OFF.
3. press OK to save it.
4. a two-beep sound emit out for confirm.
09 CALL TIMER
To set up the time counting of a call. Once setting on the call, the display show the
running time of the call. To return to the call information display, switch to TIMER OFF.