User's Manual

Setting Screen Call
The Answering System allows you to listen to a caller leaving an ICM. To set the screen ON is
to disable the base answering machine speakerphone sound while the caller is leaving message.
The screen OFF is to resume the answering machine speakerphone sound while the caller is
leaving message.
To set screen call:
Under Standby mode
1. press MENU button,
2. use UP or DOWN to select 06 SCREEN CALL, press OK button
3. use UP or DOWN button to select 01 SCREEN ON, or 02 SCREEN OFF, press OK to save
it.
4. A three-beep sound emit out to confirm the setting.
To converse with caller:
No matter to put the Screen ON or Screen OFF, while the caller is leaving the message, the line
indicator is light on. At this time, press the line button which is on recording (the light on
button) via base or handset, the answering machine will stop recording and you can converse
with the caller.
To get another line while the caller leaving message:
1. When the MENU system is put on SCREEN ON and some one is leaving message, the
voices will be muted. But you can see LINE 1 or LINE 2 LED is lighting on. The message
is left on answering machine.
2. You can make a call on the second line via handset while caller is leaving message. The
dialer might wish to mute the voice who is leaving message on machine if he happen to
make a call at the same time.
3. The system is defaulted at SCREEN OFF
To listen the message playing via base
When listening the message, if you do not want to disturb others with the ICM voice, you may
pick up the handphone to listen. At this time, if a call from outside, only handsets will be
ringing as the base speakerphone is busy with answering
07 MAILBOX CODE
The phone system allows you with 5 mailboxes: one is for public mailbox (General Mailbox),
and 4 personal Mailboxes.
For user to access personal mailbox (except General Mailbox) in base must enter mailbox
password before operation of listening incoming message or any other recording OGM etc.