User's Manual

Note:
1. If you don’t retrieve the call after 30 sec, the call is automatically back to handphone, and base display “ L1 CALLING”.
2. At this time, if handphone is busy when the call is back, the handphone will hear bi-bi sound. Then, the call will be transferred to all
handsets (all handsets will ring)
3. If you don’t hang up the handphone after you have put a call on hold, you pick up with another handset extension, the call remains
connected to your telephone and is taken off hold. This means any background noise from your area will be heard by the caller and the
other extension.
4. If an incoming call is placed on hold and no one at another extension handset pick up, the telephone will ringing back to base after 30
sec. When the call come back to base, and base are in busy, the call will be transferred to the rest of handsets.
Note:
To put a call on hold via independent handset when under the conversation.
1. When handset is on the phone, the handset display showing “ CONF HOLD “.
2. Press right softkey to select HOLD (refer to Handset Call Transfer),
3. dial another handset number and press OK.
4. if another handset doesn’t pick up or in busy status, then it ring back to the first handset after 30 sec
* When the phone is putting on hold, the caller will hear bi-bi tone until the other extension is picked up.
Putting a call on mute
If you want to temporarily disable the base microphone.
To mute a call:
1. Press SPEAKER (or LINE 1, or LINE 2) button to get the line,
2. to turn off the microphone off, press MUTE button. You can hear your caller but your caller can
not hear you.
3. to resume speaking with your caller, press MUTE again .
4. to end conversation, press EXIT button.
Note:
To put a call on mute via independent handset, press DEL/MUTE (refer to “To mute a call via handset” )
Redial
If you do not remember a number you just dialed, press REDIAL button shows you a number you
called.
To make a call from Redial: