User manual
60D-Link DAP-1522 User Manual
Section 3 - Conguration
Site Survey:
Enable Wireless:
Wireless
Network
Name:
Band Width:
Security Mode:
Enable:
Wireless MAC
Cloning:
MAC Address:
Scan:
A function that looks for available wireless networks.
Click the check box to enable the wireless function. If
you do not want to use wireless, uncheck the box to
disable all the wireless functions.
Service Set Identier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The
SSID is case sensitive.
Select the Band Width:
Auto 20/40 - Select if you are using both 802.11n and
non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n
wireless clients.
Refer to page 77 for more information regarding
wireless security.
Enable the Wi-Fi Protected Setup feature.
Enabling this option allows the user to manually
assign the source MAC address to packets
forwarded by the bridge. If not manually assigned,
the packet’s source MAC address field will be
automatically selected as the bridge’s MAC address.
Enter the desired MAC address connected to your
bridge to enable the clone function.
Click the Scan button to search for all available devices
connected to your DAP-1522’s Ethernet ports
Wireless