Specifications

35D-Link KVM-440/450 User Manual
Section 3 - Operation
Auto-Scan in OSD: <F2>
Enter the Auto-scan mode in OSD
Press <F2> from the OSD main menu. The auto-scan banner will be shown to indicate the scanning channel.
Note: You can also enter the auto-scan mode via hotkey using <Scroll Lock> <Scroll Lock> <S> <Enter> outside the
OSD mode. Please refer to the Enter the Auto-Scan Mode section.
Exit the Auto-scan Mode
Press any key on keyboard to STOP the auto-scan function. The auto-scan banner will disappear when the scan stops.
Auto-scan Mode
There are two auto-scan modes, please refer to the Setup in OSD – Scan Mode section to set up the auto-scan mode.
1. Scan all computers which are power on.
2. Scan all computers which are marked for auto-scan.
Auto-scan Time Interval
The auto-scan time interval can be adjusted by pressing <F1> from the OSD main menu. Please refer to Setup in OSD – Scan
Time.
Channel Name
Channel Number
Indicates Scan Mode
Figure 22 - Auto Scan Banner