User manual

Figure 27: Security setup main window
7.7.2. Security Mode
To change the security mode setting, please move the highlight bar to
Security Mode, and press the <left arrow> or <right arrow> key to
change it. The <F3> Console Lock, <F6> Port Lock and user authority
functions cannot be executed until the security mode is enabled.
7.7.3. Change Administrator Password
To change the administrator password, move the highlight bar to
Admin/password, and press <left arrow> or <right arrow> key. The
administrator password setup window will be shown on the screen. Input
the new password twice and press <ENTER> to confirm, or press <ESC>
to exit.
Figure 28: Administrator password setup window
28