User manual

Note: You can also change the leading hotkey via hotkey using <CTRL> →

<CTRL> → <New Hotkey> → <Enter> outside the OSD mode. Please

refer section 6.2 Leading Hotkey Select.

7.3.6. Sound

¾ ON: Buzzer sound enabled.

¾ OFF: Buzzer sound disabled.

Note: You can also enable/disable buzzer sound via hotkey using

<Scroll Lock> → <Scroll Lock> → <B> → <Enter> outside the OSD

mode. Please refer section 6.5 Buzzer sound Disable / Enable.

7.3.7. Language

English (En) / Deutsch (De) / Francais (Fr), 3 languages are available.

7.4. Auto-Scan in OSD: <F2>

7.4.1. Start to Auto-scan in OSD

Press <F2> from the OSD main menu. The auto-scan banner will be

shown to indicate the scanning channel.

Channel Name

Channel Number

Indicates Scan Mode

Figure 22: Auto-Scan Banner

Note: You can also start auto-scan function via hotkey using

<Scroll Lock> → <Scroll Lock> → <S> → <Enter> outside the OSD

mode. Please refer section 6.6.1 Start Auto-Scan Function.

7.4.2. Stop Auto-scan

Press any key on keyboard to STOP the auto-scan function. The

auto-scan banner will disappear when the scan stops.