User manual

on the second page. Since the port information is divided onto two pages,
the page down / up indicator is a reminder to switch to alternative pages
using the <page down> or <page up> key.
7.1.7. Function Control Menu
The detail of control functions will be described in later sections. The list of
control functions:
F1: Set Up: Basic set up menu
F2: Scan: Autoscan function
F3: Lock: Setup lock/unlock, only available when F5 Security is enabled
F4: Rename: Rename selected channel name
F5: Security: Security function and user authority settings
F6: Lock Port: PC port lock function (for administrator only)
7.2. Channel Selection in OSD
7.2.1. Channel Select to Computer
Use the <UP> and <DOWN> arrow keys to highlight a computer and then
<ENTER> to select it and leave OSD menu. A banner with the channel
name will be shown on left-upper corner of the screen.
Channel Name
Channel Number
Fig. 17: Channel Banner (Single Layer)
7.2.2. Channel Select to Cascade Port
A plus mark (+) showing to the left of the channel name indicates that the
port is under the cascade channel. Pressing <ENTER>
in this channel will
enter one level down, and the screen will display a list of the computers
connected to the slave KVM.
22