User manual

17
automatically shift to left or right one channel (channel decrease / increase
to next) when the <ALT> channel shift function is enabled.
¾ Enable/Disable <ALT> channel shift function
<Scroll Lock> → <Scroll Lock> → <ALT> → <Enter>
¾ Switch one channel to the left
<Left ALT> → <Left ALT>
¾ Switch one channel to the right
<Right ALT> → <Right ALT>
6.4. Channel Select - Cascade Chain Layer
You can select the active channel directly under a cascade chain connection.
The following hotkey sequence is used for quick channel selection.
Press <Scroll Lock> twice, <D>, the cascade channel number (1, 2, 3……16),
and Press <Enter>.
¾ Select first layer channel
<Scroll Lock> → <Scroll Lock> → <D> → <CH-L1> → <Enter>
¾ Select second layer channel
<Scroll Lock> → <Scroll Lock> → <D> → <CH-L1>
→ <D> → <CH-L2> → <Enter>
¾ Select third layer channel
<Scroll Lock> → <Scroll Lock> → <D> → <CH-L1>
→ <D> → <CH-L2>
→ <D> → <CH-L3> → <Enter>
Note: With cascading 3 layers, you can select last layer directly.
Example: Press <Scroll Lock> twice, then D2D5D7, and <Enter>:
D2: layer 1 - channel 2 links to
D5: layer 2 - channel 5 links to
D7: layer 3 - channel 7 selected
Note: You can also select active channel of cascade chain in OSD menu.
Move the indicator bar to the channel to switch using <arrow key>,