Specifications

31D-Link KVM-440/450 User Manual
Section 3 - Operation
Channel Selection in OSD
Channel Select to Computer
Use the <UP> and <DOWN> arrow keys to move the highlighted bar to a computer and then press<ENTER> to select it and
exit the OSD menu. A banner with the channel name will be shown on the left-upper corner of the screen.
Channel Select to Cascade Port
A plus mark (+) showing to the left side of the channel name indicates that the port is cascaded. Move the highlighted bar to
this channel and then press <Enter>. The screen will display a list of the computers connected to the slave KVM.
Channel Name
Channel Number
Channel Name
2
nd
Layer Channel Number
1
st
Layer Channel Number
Channel Number
Return from Cascade Port
Pressing <R> will return to the upper layer OSD menu.
Figure 17 - Channel Banner (Single Layer)
Figure 18 - Channel Banner (Cascade Layer)