Specifications

26D-Link KVM-440/450 User Manual
Section 3 - Operation
Auto-scan Mode Options
There are two auto-scan modes, please refer to the Setup in OSD – Scan Mode section to set up the auto-scan mode.
• Scan all computers.
• Scan any computers which are marked for auto-scan.
Auto-scan Time Interval
The auto-scan time interval can be adjusted by pressing <F1> from the OSD main menu. Please refer to the Setup in OSD – Scan
Time section.
Note: You can also enter or exit the auto-scan mode by pressing <F2> from the OSD main menu. Please refer to the Auto-Scan in OSD
section.