Specifications

20D-Link KVM-440/450 User Manual
Section 3 - Operation
Hot Key Operation
Call OSD Menu
Press <Scroll Lock> twice and press <Enter>, the OSD “Main Menu” will be displayed on the monitor screen. All of the KVM
parameters can be setup in OSD mode. You can also execute some KVM functions in OSD.
<Scroll Lock><Scroll Lock><Enter>.
Leading Hotkey Select
The two-step hotkey sequence is used for quick function execution. The leading key is <Scroll Lock> by default. However, you
may change the leading hotkey if you want.
By pressing <CTRL> twice, <New Hotkey>, then pressing <Enter>, you can change the leading hotkey.
The available leading hotkeys are <Scroll Lock>, <Num Lock> or <Caps Lock> for option.
Set leading hotkey to <Scroll Lock>
<CTRL ><CTRL> <Scroll Lock> <Enter>
Set leading hotkey to <Num Lock>
<CTRL> <CTRL><Num Lock><Enter>
Set leading hotkey to <Caps Lock>
<CTRL><CTRL><Caps Lock ><Enter>
Note: You can also change the leading hotkey by pressing <F1> from the OSD main menu. Please refer to the Setup in OSD – Hotkey
section.