Quick Installation Guide

TECHNICAL SUPPORT dlink.com/support
6
DIS-3650AP Quick Installation Guide
ENGLISH
4. Tighten the grounding wire (green-and-
yellow, 18AWG) to the DIS-3650AP until it
is securely attached.
Figure 14: Attaching the Grounding Wire
5. Attach the other end of the grounding wire
to either the wall or pole mount. Ensure
that the wall or pole mount is connected
to an electrical ground.
Professional installation instruction
1. Installation personal
This product is designed for specific application
and needs to be installed by a qualified personal
who has RF and related rule knowledge. The
general user shall not attempt to install or
change the setting.
2. Installation location
The product shall be installed at a location
where the radiating antenna can be kept
28cm from nearby person in normal operation
condition to meet regulatory RF exposure
requirement.
3. External antenna
Use only the antennas which have been
approved by the applicant. The non-approved
antenna(s) may produce unwanted spurious
or excessive RF transmitting power which
may lead to the violation of FCC limit and is
prohibited.
4. Installation procedure
Please refer to user’s manual for the detail.
5. Warning
Please carefully select the installation position
and make sure that the final output power does
not exceed the limit set force in relevant rules.
The violation of the rule could lead to serious
federal penalty.