Quick Installation Guide

2
DIS-3650AP Quick Installation Guide
ENGLISH
Interface Connectors
Figure 2: Top Connectors
# Connector Description
1 LAN(PoE)
Gigabit RJ-45 port for data and
Power over Ethernet (PoE) power.
2 CONSOLE
Connect an RJ-45 Ethernet console
for CLI control (Option)
3 Reset
Press and hold for 10 seconds to
factory reset the device
Table 2: Interface Description
Figure 3: Back Connectors
# Connector Description
1
DIN rail
Adapter
Connect DIN rail kit to mount it
on DIN-Rail.
2
Wall/Pole
Mount
Mount to connect to the mounting
plate on a wall or a pole.
3
Grounding
Wire
Connector for the grounding wire.
Table 3: Interface Description
Installation
Using Power over Ethernet (PoE)
1. Use a standard Ethernet cable to connect
the LAN(PoE) port on the DIS-3650AP to
a PoE power source device such as an
802.3at PoE switch or PoE injector.
Conguration
Using Nuclias Connect
The DIS-3650AP is designed to be managed
through Nuclias Connect. Refer to the Nuclias
Connect Manual for detailed configuration
instructions.
Note: D-Link recommends manually configuring
the device before mounting it.
Nuclias Connect App Conguration
1. Download the free Nuclias Connect app
from the App Store or Google Play by
searching for Nuclias Connect or by
scanning the QR code below.
1 2 3
2
3
1