Quick Installation Guide

DIS-3650AP Quick Installation Guide
1
ENGLISH
System Requirements
• Computers with Windows®, Macintosh®,
or Linux-based operating systems with an
installed Ethernet Adapter
Hardware Overview
LED Indicators
Figure 1: Side Panel LED
# LED Description
1
Power/
Status
Green (Solid) - Device operational
Red (Flashing) - Device booting up/
Device malfunctioned
Red (Solid) - Device boot up has failed
2 2.4
Solid green - 2.4GHz is enabled
Blinking green - data transmission
3 5G
Solid green - 5GHz is enabled
Blinking green - data transmission
4
LAN
(PoE)
Indicates whether a device is
connected to LAN and receiving
power on the PoE port.
Table 1: LED Description
Before You Begin
This installation guide provides instructions
for installing the DIS-3650AP on your network.
Additional documentation is also available on
the D-Link support website.
• Nuclias Connect Manual: For additional
information and instructions on how
to configure the device using Nuclias
Connect.
• DIS-3650AP User Manual: For additional
information and instructions on how to
configure the device using the web user
interface.
Package Contents
This DIS-3650AP package includes the following
items:
• DIS-3650AP Access Point
• Quick Start Guide
• Mounting kit (Wall/Pole/DIN Rail Mount)
- Articulation Pole x 1
- T-form Bracket x 1
- M8x40 Screw Bolts x 1
- M6 Screw x 4
- M8 Nut x 1
- Washer (M8 x 1 ; M6 x 4)
- Spring Washer (M8 x 1 ; M6 x 4)
- Stainless Hose Clamp x 2
- Anchors plastic screws x 4
- Stainless screws x 4
- DIN Rail mounting kit
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note: To power the unit, use an 802.3at PoE
Switch or PoE Injector.
2
3
4
1