Quick Installation Guide Wireless AC1200 Wave 2 Industrial Indoor Access Point DIS-2650AP DIS-2650AP 5G 2.
Contents English 1
Before You Begin Front Panel Features 1 2 3 4 5 67 8 9 ENGLISH This Quick Installation Guide gives you step-bystep instructions for setting up your DIS2650AP Wireless Access Point. The model you have purchased may appear slightly different from the one shown in the illustrations. For more detailed information about the router, please refer to the User Manual. Hardware Overview 10 DIS-2650AP Package Contents 5G 2.
Side Panel Features Attach the External Antennas The DIS-2650AP requires two external antennas to function correctly. The included antennas are ENGLISH interchangeable 1 # 2. Arrange the antennas so that they’re pointing upwards and in a configuration to receive optimal signals. Description Connector Switch Ground This is used to connect the device to ground. This is used to connect the 2 Attach the two included antennas to the RP-SMA connectors on the side of the DIS-2650AP.
3. 4. 5. Place the mounting brackets (attached to the device) on the location where you want to mount it, and use the brackets as a guide to mark where to drill the screw holes. Drill holes on the marks and insert wall anchors appropriate for the material of the wall. Installing the Device into a Rack The DIS-2650AP can be mounted on a standard rack using the included mounting plates. To install the device on a rack: 1.
EN GL IS H Powering the Device The DIS-2650AP can be powered with an 802.3at PoE source or by using the built-in terminal adapter. This allows dual power inputs using wires from the power source(s) to be screwed into the terminal connections. 3. Use a flat head screwdriver to unscrew the terminal connections that you wish to use. 4. Insert the wires into the terminal connectiosn and use the screwdriver to tighten the screws to secure the wires. Using the Terminal Connections 1.
Connecting Wirelessly 1. 1. Connect the management computer to the default SSID of the DIS-2650AP, “dlink.” 2. Manage the access point from a computer. Enter dis2650ap.local in the address field of your browser. Log in to the administration user interface. The default information is: Download the free Nuclias Connect app from the App Store or Google Play by searching for Nuclias Connect or by scanning the QR code below. 3. Username: admin Password: admin Additional Information 2.
Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 3.12 watts Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
RF Frequency Requirements This device is for indoor use only when using all channels in the 5.15 to 5.25 GHz frequency range. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device will not operate on channels which overlap the 5600-5650 MHz band. It is restricted to indoor environments only.
Japan Voluntary Control Council for Interference Statement この装置は、クラス B 情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、こ の装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをして下さい。 Japan Voluntary Control Council for Interference Statement This is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
Notes
Notes
Notes
Notes
Ver. 1.