User's Manual

32D-Link DIR-X1870
Section 3 - Conguration
Auto Conguration (SLAAC/DHCPv6)
Select Auto Conguration (SLAAC/DHCPv6) if your ISP assigns your IPv6
address when your router requests one from the ISP’s server. Some ISPs
require you to adjust these settings before your router can connect to the IPv6
Internet.
IPv6 DNS Settings
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
If Use the following DNS address is selected:
Primary DNS
Server:
Enter the primary DNS server address.
Secondary DNS
Server:
Enter the secondary DNS server address.
LAN IPv6 Address Settings
Enable DHCP-PD: Enable or disable prex delegation services.
LAN IPv6 Link-
Local Address:
Displays the DIR-X1870's LAN link-local address.
If Enable DHCP-PD is disabled, these additional parameters are available for conguration:
LAN IPv6 Address: Enter a valid LAN IPv6 address.
LAN IPv6 Link-
Local Address:
Displays the device's LAN link-local address.