User's Manual

10D-Link DIR-X1870

Section 2 - Installation

Web Based Installation

If you do not wish to use the D-Link Wi-Fi app, you can manually set up your device and congure your Wi-Fi network using the

web-based user interface.

Step 1

Position the DIR-X1870 close to your Internet-connected modem and

connect an Ethernet cable to the modem and to the WAN port of the

DIR-X1870. Next, connect the power adapter and plug the DIR-X1870 into a

power outlet.

Step 2

Wait for the DIR-X1870 to boot up. When the wireless LEDs are solidly lit,

wirelessly connect your computer to the Wi-Fi name (SSID) printed on the

bottom of the device, or on the included Quick Install Card.

Your device is now set up and ready to use. You can now congure your DIR-X1870 Wi-Fi settings using the free D-Link Wi-Fi

mobile app or the web-based user interface. Refer to the Conguration section on page page 11 for more information on

conguring your network using the web-based user interface.

http://dlinkrouter.local./

Step 3

Type http://dlinkrouter.local./ into a web browser and follow the on-screen

instructions to complete the setup.

MODEM

Wi-Fi

SSID:

Password:

QUICK INSTALLATION CARD

Model Name: DEVICE

Wi-Fi Name: dlink-XXXX

Password: XXXXXXXX

S/N: 123456789

SETUP QR CODE