User's Manual

80D-Link DIR-883 User Manual
Section 4 - Conguration
  
System

router to factory default settings, or reboot the device. Please note that restoring the settings to the factory
defaults will erase all settings, including any rules you have created.
 Features Management





 




 

Never


 


Time: 00
00


 


 Mon
Time: 00
00

System
Save Settings To
Local Hard Drive:
This option allows you to save the current router conguration settings
to a le on your computer.
Load Settings
From Local Hard
Drive:
This option allows you to load a previously saved router conguration
le. This will overwrite the routers current conguration.
Restore To Factory
Default Settings:
This option allows you to restore all conguration settings back to the
settings that were in eect at the time the router was shipped from the
factory. Any settings that have not been saved will be lost, including
any rules that you have created. If you want to save the current router
conguration settings, use the Save Settings To Local Hard Drive
button above.
Auto Reboot Conguration
Reboot The
Device:
Click to reboot the router immediately.
Auto Reboot: You may set the DIR-883 to automatically reboot at a set time. The options
are Never, Daily, Weekly. You may set the hour using a 24 hour format,
the minute, and the day you wish to have the DIR-883 automatically
reboot.
Click Save when you are done.
System
This page allows you to save the DIR-883's current conguration, load a previously saved
conguration, reset the router to its factory default settings, or reboot the DIR-883.
From the Admin page, click System. To return to the Admin page, click Admin.