User's Manual

72D-Link DIR-883 User Manual
Section 4 - Conguration
  

Dynamic DNS


This feature is helpful when running a virtual server.
 Features Management


Enabled
 

dyndns.com
dyndns.com

User Name:
Password:
Time Out:

hours
Status    Delete



Dynamic DNS
Most Internet Service Providers (ISPs) assign dynamic (changing) IP addresses. Using a
Dynamic Domain Name Server (DDNS) service provider, people can enter your domain name
in their web browser to connect to your server no matter what your IP address is. Owners
of D-Link routers can use the dlinkdns service. In the Features menu on the bar on the top
of the page, click Dynamic DNS.
At the bottom of the page are the IPv6 host settings. To congure an IPv6 dynamic DNS
host, refer to IPv6 Host on page 73.
Enable Dynamic
DNS:
Enabling dynamic DNS reveals further conguration options.
If you Enabled Dynamic DNS, the following options are available:
Status: Displays the current DDNS connection status.
Server Address: Enter the address of your DDNS server, or select one from the drop-
down menu.
Host Name: Enter the host name that you registered with your DDNS service
provider.
User Name: Enter your DDNS username.
Password: Enter your DDNS password.
Time Out: Enter a timeout time (in hours).
Click Save when you are done.