User's Manual
66D-Link DIR-883 User Manual
Section 4 - Conguration
Features Management
Advanced
Firewall Settings
Delete
IPv4/IPv6 Rules
The IPv4/IPv6 Rules page contains advanced options that let you set rules to restrict IP trac
across your network or from your network to the Internet. To congure IPv4 rules, click IPv4
Rules from the Firewall Settings page. To congure IPv6 rules, click IPv6 Rules from the
Firewall Settings page. To return to the main Firewall Settings page, click Advanced.
Use the drop-down menu to select whether you want to ALLOW or DENY the rules you
create. You can also choose to turn ltering OFF.
If you wish to remove a rule, click on the corresponding trash can icon in the Delete column.
If you wish to edit a rule, click on the corresponding pencil icon in the Edit column. If you
wish to create a new rule, click the Add Rules button. Click Save when you are done. If you
edit or create a rule, the following options will appear:
Create New Rule
Name: Enter a name for the rule.
Source IP Address
Range:
Enter the source IP address range that the rule will apply to, and using
the drop-down menu, specify whether it is a WAN or LAN IP address.
Destination IP
Address Range:
Enter the destination IP address range that the rule will apply to, and
using the drop-down menu, specify whether it is a WAN or LAN IP
address.
Port Range: Select the protocol of the trac to allow or deny (Any, TCP, or UDP)
and then enter the range of ports that the rule will apply to.
Schedule: Use the drop-down menu to select a schedule to apply. The schedule
may be set to Always Enable, or you can create your own schedules
in the Schedules section. Refer to Schedule on page 76 for more
information.
Click Save when you are done.
Name:
WAN
WAN
TCP
:
Always Enable