User's Manual

6D-Link DIR-869 User Manual

Section 1 - Product Overview

Hardware Overview

Back Panel

1 Reset Button To reset the device to its factory default settings, use a paper clip press and hold the reset button for 3 seconds.

2 WPS Press to start the WPS process and automatically create a secure connection to a WPS client.

3 LAN Ports (1-4) Connect 10/100/1000 Ethernet devices such as computers, switches, storage (NAS) devices and game consoles.

4 Internet Port Using an Ethernet cable, connect your broadband modem to this port.

5 Power Connector Connector for the supplied power adapter.

6 Power Button Press the power button to power the DIR-869 on and o.

7 Mode Switch

Select between Router and Extender modes. To change modes, move the switch to the desired position and

after 5 seconds the router will reboot into the desired mode. Router is the default mode.

Note: Extender Mode Access Point functionality available at launch, additional functionality available via rmware

update in Q2 2016.

5 6 7

321