User's Manual

83D-Link DIR-860L User Manual

Section 3 - Conguration

This Wizard helps you add wireless devices to the wireless network.

The wizard will either display the wireless network settings to guide you through manual conguration, prompt you to enter the

PIN for the device, or ask you to press the conguration button on the device. If the device supports Wi-Fi Protected Setup and

has a conguration button, you can add it to the network by pressing the conguration button on the device and then the on the

router within 120 seconds. The status LED on the router will ash three times if a device has been successfully added to the network.

There are several ways to add a wireless device to your network. A “registrar” controls access to the wireless network. A registrar

only allows devices onto the wireless network if you have entered the correct PIN, or pressed a special WPS button on the device.

The router acts as a registrar for the network, although other devices may act as a registrar as well.

Click to start the wizard, and refer to page 38 for further instructions.

Add Wireless

Station:

ou can also simply press the WPS button on the side of the router, and then press the

WPS button on y

our wireless client within 120 seconds to automatically connect without

logging into the router.

Refer to page 106 for more information.

WPS Button