User's Manual

56D-Link DIR-842 User Manual
Section 4 - Conguration
Port Forwarding
Enter a name for the rule.
Enter the IP address of the computer on your local network that you
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
&OUFSUIF5$1QPSUTUIBUZPVXBOUUPPQFO:PVDBOFOUFSBTJOHMF
QPSUPSBSBOHFPGQPSUT4FQBSBUFQPSUTXJUIBDPNNBGPSFYBNQMF

&OUFSUIF6%1QPSUTUIBUZPVXBOUUPPQFO:PVDBOFOUFSBTJOHMF
QPSUPSBSBOHFPGQPSUT4FQBSBUFQPSUTXJUIBDPNNBGPSFYBNQMF

Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to "MXBZT&OBCMF, or
you can create your own schedules in the SchedulesTFDUJPOSFGFS
to Schedulei4DIFEVMFwPOQBHF
Click "QQMZ when you are done.
Name:
Local IP:
TCP Port:
UDP Port:
Schedule:
Port forwarding allows you to specify a port or range of ports to open for specic
devices on the network. This might be necessary for certain applications to connect
through the router. In the Features menu on the bar on the top of the page, click
1PSU'PSXBSEJOH.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the "EE3VMFTbutton
. Click Save when you are done. If you edit or
create a rule, the following options will appear: