User's Manual

55D-Link DIR-842 User Manual
Section 4 - Conguration
IPv4/IPv6 Rules
Enter a name for the rule.
Enter the source IP address range that the rule will apply to, and using
the drop-down menu, specify whether it is a 8"/ or -"/ IP address.
Enter the destination IP address range that the rule will apply to, and
using the drop-down menu, specify whether it is a 8"/ or -"/ IP
address.
4FMFDUUIFQSPUPDPMPGUIFUSBóDUPBMMPXPSEFOZ"OZ, TCP, or UDP
and then enter the range of ports that the rule will apply to.
Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to "MXBZT&OBCMF, or
you can create your own schedules in the SchedulesTFDUJPOSFGFS
to Schedulei4DIFEVMFwPOQBHF
Click "QQMZ when you are done.
The IPv4/IPv6 Rules section is an advanced option that lets you congure what kind
of trac is allowed to pass through the network. To congure the IPv4 rules, from
the Firewall Settings page click IPv4 Rules. To congure IPv6 rules, from the Firewall
Settings page click IPv6 Rules. To return to the main Firewall Settings page, click
"EWBODFE.
To begin, use the drop-down menu to select whether you want to "--08 or DENY
UIFSVMFTZPVDSFBUF:PVDBOBMTPDIPPTFUPUVSOöMUFSJOH0''.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the "EE3VMFTbutton
. Click Save when you are done. If you edit or
create a rule, the following options will appear:
Name:
Source IP
Address Range:
Destination IP
Address Range:
Port Range:
Schedule: