User's Manual

53D-Link DIR-842 User Manual
Section 4 - Conguration
Firewall Settings
&OBCMFPSEJTBCMF%FNJMJUBSJ[FE;POF%.;5IJTDPNQMFUFMZFYQPTFT
the client to threats over the Internet, and is not recommended in
ordinary situations.
If you enabled DMZ, enter the IP address of the client you wish to
expose, or use the drop-down menu to quickly select it.
&OBCMJOH4UBUFGVM 1BDLFU*OTQFDUJPO41* IFMQTUPQSFWFOUDZCFS
attacks by validating that the trac passing through the session
conforms to the protocol.
Enable this feature to protect your network from certain kinds of
“spoong” attacks.
Enable or disable IPv6 simple security.
Enable or disable IPv6 ingress ltering.
Enable DMZ:
DMZ IP
Address:
Enable SPI IPv4:
Enable
Anti-Spoof
Checking:
IPv6 Simple
Security:
IPv6 Ingress
Filtering:
The router’s rewall protects your network from malicious attacks over the Internet.
In the Features menu on the bar on the top of the page, click 'JSFXBMM4FUUJOHT. Click
"EWBODFE4FUUJOHT to expand the list and see all of the options.