User's Manual
26D-Link DIR-842 User Manual
Section 4 - Conguration
Enter the username provided by your ISP.
Enter the password provided by your ISP.
Select either "MXBZTPO, 0O%FNBOE, or Manual.
Enter a maximum idle time during which the Internet connection is
maintained during inactivity. To disable this feature, enable "VUP
reconnect.
Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
&OUFSUIF*1BEESFTTQSPWJEFECZZPVS*414UBUJD*1POMZ
&OUFSUIF*41TFSWJDFOBNFPQUJPOBM
Enter the primary DNS server IP address assigned by your ISP.
Enter the secondary DNS server IP address assigned by your ISP.
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Click Save when you are done.
Username:
Password:
Reconnect
Mode:
Maximum Idle
Time:
"EESFTT.PEF
*1"EESFTT
Service Name:
Primary DNS
Server:
Secondary DNS
Server:
MTU:
Select PPPoE if your Internet connection requires you to enter a username and password. This information is provided by your Internet Service
1SPWJEFS*41
PPPoE