User's Manual

28D-Link DIR-840 User Manual

Section 3 - Conguration

Choose from Username, FQDN, User@FQDN, or Key ID using the drop-down menu and then the ID in the box.

Check this box to enable Dead Peer Detection, then enter the time in seconds in which a peer is determined to be no longer active.

You may also enter a delay period in seconds.

Check this box to include additional username and password authentication requirements for the VPN. Select Server Mode, Client

Mode, or None. Then enter the user name and password if required by the remote VPN server endpoint congured in xAuth Server

Mode.

Check this box to enable IKE Proposal.

Check this box to enable IPSec Proposal.

Remote ID:

Local ID:

Dead Peer

Detection (DPD):

XAUTH:

Set IKE Proposal:

Set IPSEC

Proposal:

Use this area to Enable IKE Proposals. Then determine the

Encryption and Authentication types, as well as the DH

Group from the drop-down menus.

Use this area to Enable IPSec Proposals. Then determine the

Encryption and Authentication types from the drop-down

menus.

IKE Proposal

Settings:

IPSEC Proposal

Settings: